Home » Products » Desktop » IT-100

IT-100

The LDG IT-100 is an automatic tuner intended for use with modern Icom transceivers. It works with any Icom transceiver that supports an AH-3 or AH-4 Icom tuner; a partial list of compatible units includes: IC-706, 703, 718, 7000, 7100, 7200, 7300, 7410, 746, 756, 7600, 7610. The interface cable is included. The IT-100 connects to the radio via its Tuner jack to control the tuning cycle; the transceiver’s Tune button controls the tuner. The Tuner jack also powers the tuner, so it requires no external power supply. Since the IT-100 is matched to your specific rig, you just press the Tune button on the radio, and the rig and tuner do the rest: reduces power, transmits a carrier, automatically matches the antenna to the rig, then restores the original power and mode.

Like most LDG tuners the IT-100 operates automatically, beginning a tuning cycle when the user presses the tune Button the radio or tuner. It also features LDG’s advanced memory tuning, providing 2,000 memory locations; when tuning near a previously used frequency it will recall the settings for nearly instant tuning. It learns your favorite frequencies and bands as you use it. You can also start a tuning cycle manually whenever necessary.

Price – $179.99 US

  • 0.1 to 125 Watt SSB/CW, 30W Digital.
  • 2000 memories for instantaneous band changing.
  • Controlled from Icom Tuner button on radio or Push button on Tuner.
  • Compatible with any Icom radio that is AH-4 or AH-3 compatible. (6M tuning from Tuner button for radios that are only AH-3 compatible)
  • Partial radio list: IC-706, 703, 718, 7000, 7100, 7200, 7300, 7410, 746, 756, 7600, 7610 (and all variants).
  • Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
  • 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
  • Tunes 4 to 800 ohm loads (16 to 150 on 6M)
  • For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna.
  • Includes Icom interface cable. Ready to use out of the box.
  • Small Size Enclosure: 6.5″ L x 6.5″ W x 1.25″ H.
  • Weight: 1.5 pounds.

 

Currently there are no firmware updates for this product.